application to be a tester

Monday, November 29, 2010

Free watermelon diaper clutch crochet pattern

Watermelon Diaper Clutch


















Materials needed
Red Heart worsted weight 3.5oz
rasberry
lime green
white
black pony beads 9x6
H Hook
Yarn Needle

Gauge: 3sc=1''
3sc rows = 1''




CLUTCH

Rnd 1: With lime green and H hook, ch9, 3sc in 2nd ch from
hook, 1sc in each of the next 6ch, 5sc in last ch. Now working
on opposite side of ch, 1sc in each of the next 6sc, 2sc in last sc.
Slst to join. Ch2 (22sc)

Rnd 2: 1dc in same st as joining, 2dc in each of the next 2sc,
1dc in each of the next 6sc, 2dc in each of the next 5sc, 1dc in
each of the next 6sc, 2dc in each of the last 2sc. Slst to join.
Ch2 (32dc)

Rnd 3: (2dc in next dc, 1dc in the next dc,) repeat 2 more
times, 1dc in each of the next 5dc, (2dc in next dc, 1dc in the
next dc,) repeat 4 more times, 1dc in each of the next 6sc, (2dc
inthe next dc, 1dc in the next dc,) repeat one more time. Slst to
join. Ch1 (42dc) Fasten off lime green and attach white.

Rnd 4:With white and H hook, 1sc in the back loop of each dc around. Slst to join. Ch1 (42sc) Fasten off white.

Now take rasberry colored yarn and thread yarn thru yarn needle, then add about 50 black pony beads onto yarn. Take yarn needle off and make beginning loop on hook. Continue following instructions for diaper clutch and add beads as desired..to add (1sc, pull up bead and sc around bead, sc in next sc)
Note: when do next rnd, make sure to skip the black bead...keep count of your stitches in each rnd.
Note 2: I put about 4 or 5 beads on every third rnd. I did two rnds with no beads and the third rnd had 4 0r 5 beads on it.

Rnd 5: 1sc in both loops of each sc around. Do not join. Now
work in continuous rnds. Use place marker if desired. (42sc)

Rnds 6-27: 1sc in each sc around. (42sc)

FLAP
Row 1: (make sure you are position on one side of the clutch)
1sc in each of the next 21sc. Ch1,turn. (21sc)

Rows 2-3: 1sc in each sc across. Ch1,turn. (21sc)

Row 4: Dec 1st 2 sc tog, 1sc in each sc across to last 2sc, dec last
2sc tog. Ch1,turn. (19sc)
Row 5: 1sc in each sc across. Ch1,turn. (19sc)

Rows 6-12: repeat rows 4 and 5 alternately. Ending with 11sc.

TRIM
Rnd 1:End of row 12. ch1 and work 1sc in each end of rows and
around the front of the clutch. When you get to a corner on top
of clutch. Ch43, slst back into the same st, then work 1slst in
each of the 42chs, slst into next st on clutch. Continue all the
way around until you get back to where you started. Slst to join
and tie in all ends. Fasten off rasberry and remove leftover beads if any.

Rnd 2: attach white and work 1sc around entire opening of clutch. Slst to join. Fasten off white and attach lime green.

Rnd 3: 1hdc in each sc around. Slst to join. Fasten off and tie in ends.


You do not have my permission to recopy, redistribute, or
resell this pattern as your own. You do have my permission to
sell your finished items that you made from my patterns, but
you are responsible for your finished items.

©Sandy's Cape Cod Originals 

You can find more of my patterns at
sandyscapecodorig.etsy.com
capecodconsignments.etsy.com
anniesattic.com
epatternscentral.com

free robot cocoon crochet pattern

I am trying to revamp my free patterns and set it up so you can click on the link for the pattern you want and print out only that one. To do that I am reposting some of my patterns separately. Enjoy!



Robot Cocoon and Hat Crochet Patten





























Materials Needed:
Caron's Simply Soft Worsted
Charcoal 5oz.
Grey Heather-small amount
Spring Green-3oz.
Turquoise-3oz. 
Black-small amount
D and G hook
Yarn Needle

Gauge:4sc’s rows =2"s
4sc’s =1"

HAT
Top of Hat:
Row 1: With G hook and Charcoal color, ch11, 1sc in 2nd ch from hook, 1sc in remaining chs. Ch1,turn. (10sc)

Row 2: 1sc in each sc across. Ch1,turn. (10sc)

Rows 3-11: 1sc in each sc across. Ch1, turn. (10sc)

Row 12: 1sc in each sc across. Ch1. Do not turn. (10sc)


FIRST SIDE
Row 1: Now turn piece and working on the side of the rows, 1sc in each of the nex10 rows..skipping 2ends of rows anywhere so that you can fit in 10sc’s..Ch1, turn.

Row2-10: 1sc in each of the next 10sc’s. Ch1,turn. (10sc)
Fasten off and attach charcoal yarn to second side of square.

SECOND SIDE
Row 1: Work 1sc in each st across. Ch1,turn. (10sc’s)

Rows 2-10: 1sc in each of the next 10sc’s. Slst st in the next sc. Ch1, turn. (10sc) Fasten off and attach to 3rd side of hat.

THIRD and FOURTH SIDES
Repeat Rows 1-10 for 3rd and 4th sides.
Fasten off and sew up all four side seams to form hat.
Then attach charcoal yarn anywhere on hat and work 3 rows of sc, decreasing 8sc’s anywhere on the first row of sc’s.
Fasten off.

COCOON
Front Panel
Row 1: With G hook and turquoise, ch15 , 1sc in 2nd ch from hook and in each remaining ch. Ch1, turn. ( 14sc’s)

Rows 2-16: 1sc in each sc across. Ch1,turn. (14sc’) end of row 16-fasten off turquoise.
Rnd 1: With G hook and lime green, attach lime green anywhere on turquoise. 1sc in each sc and each end of rows, and working 2sc’s in each corner, around. Slst to join. Fasten off lime green.

Rnd 2-5: Attach charcoal and work 1sc in each st around, working 2sc’s in each corner. Ch1,turn.

Rows 1-11: 1sc in each sc across. Ch1,turn. (20sc’s) fasten off and put aside for now.
BOTTOM PANEL
Row 1: With charcoal and G hook, ch21, 1sc in 2nd ch from hook, and in each remaining ch. Ch1,turn. (20sc’s)

Rows 2-20: 1sc in each sc across. Ch1, turn. (20sc’s)

Row 21: Now holding front panel and bottom panel together, with right sides facing each other, sc row 11 from front panel to row 20 of bottom panel. Fasten off.

SECOND PANEL
Row 1: Attach grey to second side of bottom panel. 1sc in each st across. Ch1, turn. (20sc’s)

Rows 2-4: 1sc in each sc across. Ch1,turn. (20sc’s)

Row 5: 1sc in first sc, dec next 2sc’s tog, 1sc across to last 3sc’s, dec next 2sc’s tog, 1sc in last sc. Ch1,turn. (18sc’s)

Rows 6-8: 1sc in each sc across. Ch1,turn. (18sc’s)

Row 9: 1sc in first sc, dec next 2sc’s tog, 1sc across to last 3sc’s, dec next 2sc’s tog, 1sc in last sc. Ch1,turn. (16sc’s)

Rows 10-13: 1sc in each sc across. Ch1,turn. (16sc’s)

Row 14: 1sc in first sc, dec next 2sc’s tog, 1sc across to last 3sc’s, dec next 2sc’s tog, 1sc in last sc. Ch1,turn. (14sc’s)

Rows 15-20: 1sc in each sc across. Ch1, turn. (14sc’s) end of row 20 fasten off.
THIRD AND FOURTH PANELS
Repeat rows 1-20 on Second Panel
sew up the 4 sides of the cocoon

Now continue on with G hook and attaching grey to the front panel’s right seam. If cocoon does not measure 13"s, then work around in sc’s until the cocoon measures 14"s. Stop at the right side of the front panel and ch1 and turn.

Row1: 1sc in first sc, dec next 2sc’s tog, 1sc in each sc to last 3sc’s, dec next 2sc’s tog, 1sc in last sc. Ch1,turn. (42sc’s)

Rows 2-5: 1sc in first sc, dec next 2sc’s tog, 1sc across to last 3sc’s, dec next 2sc’s tog, 1sc in last sc. Ch1,turn. (34sc’s)

Rows 6-12: 1sc in each sc across. Ch1, turn. (34sc’s) or until top piece measures 3"s tall.

BORDER
Rnds 1-2: 1sc in each sc and around the front of the cocoon. Fasten off and tie in ends.

Embellishments for Beanie

Ear Screws -make 2
Rnd 1: With grey heather or silver color and G hook, ch2, 6sc’s in 2nd ch from hook. Slst to join. Ch1. (6sc)

Rnd 2: Working over the whole sc on rnd 1, work 8sc’s. Slst to join. Ch 4

Rnd 3: 1sc in 2nd ch from hook, 1sc in each of the next 2sc’s, slst around the circle from rnd2, slst on the opposite side of the ch4 that you made on rnd 2. Slst to join. Fasten off leaving a tail to sew and sew the screw onto the side of hat, approx. between rows 8-10.

ANTENNA
With black and D hook, ch13, dc in 3rd ch from hook, 1sc in next ch, 1slst in each of the remaining chs, ch13, dc in 3rd ch from hook, 1sc in next ch, 1slst in each of the remaining chs. Slst to join. Fasten off leaving a tail to sew with and attach antenna to top of hat.

Embellishments for Cocoon
Knobs
First knob: With G hook and grey heather, ch2, 8sc’s in 2nd ch from hook. Slst to join. Fasten off leaving a tail to sew with and sew circle onto front of cocoon as shown in pictures.

Second knob: With G hook and grey heather, ch2, 8 hdc’s in 2nd ch from hook. Slst to join. Fasten off leaving a tail to sew with and sew circle onto front of cocoon as shown in pictures.

Third Knob: With G hook and grey heather, ch3, 8 dc’s in 3nd ch from hook. Slst to join. Fasten off leaving a tail to sew with and sew circle onto front of cocoon as shown in pictures.

SQUIGGLE LINE
With D hook and grey heather, ch 32, 1sc in 2nd ch from hook,
1sc in each of the next 2sc’s,
skip 2chs,
1sc in each of the next 3sc’s,
3sc’s in the next sc,
1sc in each of the next 3sc’s
skip 2chs,
1sc in each of the next 3sc’s,
3sc’s in the next sc,
1 sc in each of the next 3sc’s
skip 2 chs
1sc in each of the last 3sc’s.
Fasten off leaving a tail to sew with and sew this squiggly line to front of cocoon as shown in pictures.

LEFT EYE
With Grey Heather and D hook, ch5, 2sc’s in 2nd ch from hook, 1sc in each of the next 2ch’s, 3sc’s in last ch. Now working on opposite side of ch, 1sc in each of the next 2ch;s, 1sc in the last ch. Slst to join. Fasten off leaving a tail to sew with. Put aside for now.
With Turquoise and D hook, ch2, 6sc’s in 2nd ch from hook, slst to join. Fasten off leaving a tail to sew with and attach this turquoise circle to front of grey heather piece. Attach to front of cocoon as shown in pictures.

RIGHT EYE
With Lime Green and D hook, ch2, 8sc’s in 2nd ch from hook, slst to join. Fasten off leaving a tail to sew with and attach to front of cocoon.


©Sandy's Cape Cod Originals 2009

You can sell any items that you make from using my patterns, but you are responsible for your finished products. Please do not resell this pattern as your own.

You can find more of my patterns at
The Ravelry under sandy powers designer
sandyscapecodorig.etsy.com
capecodconsignments.etsy.com
anniesattic.com
epatternscentral.com